Party Marble Cheese Tray

This DIY project is so super simple yet very elegant. In no time at all you can have a handy serving tray to use or give as a gift. The best part is that you can make it as a holiday gift for less than $10.00!

 

Craft Supplies Needed:

 

• Drill
• Glass & tile drill bit
• Marble 12x12
• Measuring tape
• Water
• Drawer handles
• Shorter screws for handle
• Bumpers

 

Project Instructions:

 

1. Place some painters tape on the tile where you want your handles to go, approximately one inch from the edge. Find the center of the tile and mark it with a pencil on the tape.
2. Measure the distance of the holes in your drawer handle, divide that by two. Measure that distance from the center on each side and mark it. (In other words the distance to the holes in your handle should be equal on both sides from the center).
3. Place your tile on a surface that has some give. We set ours on a pizza box.
4. Drill your hole on a lower speed. Add water to keep your drill bit cool. Keep adding water as the dust from the drill turns to paste.
5. You may need shorter screws to attach the handles. We replaced the screws in the package with 5/8” long screws.
6. Attach handles to the tile and add a bumper to each corner.